欢迎访问《空军工程大学学报》官方网站!

咨询热线:029-84786242 RSS EMAIL-ALERT
大迎角飞行晶质模拟研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

V212. 12

基金项目:


Study about high angle of attack flying qualities with simulator
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了探索出一条适合于评估失速迎角前大迎角飞行品质评估的思路,通过选取推杆并改变10°姿态角,带过载的从一侧到另一侧的倾斜井截获90°滚转角及空-空跟踪三项任务作为子任务集,在一台地面飞行模拟器上对一架第三代战斗机大迎角飞行品质进行了评估,并把评估结果与通过等效系统方法得到的结果进行了对比,结果表明尽管大迎角品质边界相对于小迎角有所不同,但只要适当调整品质边界,则用于评估小迎角品质的方法如等效系统等,在大迎角时仍可采用。

    Abstract:

    In order to explore how to evaluate the high attack(AOA) flying qualities before stall AOA,through pushing stick and changmg posture angle by 10°, to roll from bank to bank and to capture 90° roll angle and air to alr tracking are chosen as a subset to study flying qualities at high angle of attak. Secondly,flying qualities of a third generatlOn fighter are evaluated with a slmulator. At last. the results of simulationevaluatlOn are compared with ones derived from equivalent system method. The conclusion is that if the boundary of flying qualities are adjusted suitably , the high AOA flying qualities can still be evaluated by equivalent system method. although the boundary of high AOA flying qualities is different from small AOA ones.

    参考文献
    相似文献
    引证文献
引用本文

胡朝江,周航星.大迎角飞行晶质模拟研究[J].空军工程大学学报,2001,(1):6-9

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-11-19
  • 出版日期: